Level Sensors / Transducers / Others

TILT SWITCH
(Series SW 4211)

Tilt switch level sensor is a very rugged and proven instrument for monitoring top level of bulk material stored in an open space or in a bunker / silo. It has a special level detecting probe which is beyond a preset angle due to piling of material. The sensor probe is available in a robust MS tube for solids and a light duty plastic tube for food grains and fertilizer. Special models for use in hazardous environment are available.

DIAPHRAGM TYPE BIN MONITOR
(Series BLS 301M)

Jayashree Diaphragm Type Bin Monitor offers economical, reliable and durable point level controls for point level detection of dry bulk materials. The units can be used to eliminate bin overflow, maintain a pre-determined material level, indicate plugging of chutes or conveyors or provide any of a number of level control function. The flush mount, non-intrusive units are ideally suited when vessel size or internal clearance is limited or where protrusion into a vessel is not acceptable. All installation and servicing, including diaphragm replacement and sensitivity adjustment can be done from outside the vessel.

RF CAPACITANCE POINT LEVEL SENSORS

RF POINT LEVEL SENSOR DISK TYPE
(Series SW 6201)

The RF Point Level Sensor is a most rugged and proven sensor for monitoring level in a chute. This is very useful for monitoring chute blockage. It is a special heavy duty disk / flange mounted probe. The probe senses only the steady level of coal lumps and does not actuate due to falling material dust or humidity.

The effect of cable capacitance and drift with temperature is eliminated by using a driven shield arrangement. The controller unit operates an output relay when the coal level reaches near the sensor face. The probes are available for working temp. up to 200°C. Probes of different types are available for specific application like telescopic, Teflon coated etc.

ROTARY PADDLE BIN MONITOR
(Series JKA 833)

Jayashree line of rotary paddle bin monitors consists of the most reliable, rugged and economical point level control sensors available for detection of dry bulk materials. These easy to install units are proven performers in a wide variety of bulk materials. These paddle units can be used to eliminate bin overflow, maintain a predetermined material level, indicate plugging of conveyors and pneumatic lines or provide any of a number of level control functions. Unlike many other available paddle units, Jayashree's paddle level indicators incorporate a feature that automatically shuts off the motor of the unit when the paddle is in a stalled position, which both extends the life of the motor and minimizes maintenance.

ULTRASONIC LEVEL SENSOR
(Series SW 3051)

The Ultrasonic level sensors of the Series SW 3051 are very useful for sensing high levels (up to 20 meters.) of liquids or slurry material. The sensor gives a 4-20 mA output signal to the controller and operates relays at preset high and low levels. Probes are available forsensing water levels of 5/10/15/20 meters.

VIBRATORY ROD TYPE POINT LEVEL SENSOR

Jayashree Vibrating Rod Sensor provides reliable point level sensing in a wide variety of applications within powder and bulk solids markets. The vibrating probe principle utilized overcomes typical application difficulties associated with changes in material, electrical dielectric constant, temperature or humidity while providing reliable, solid state electronic circuitry, which requires no calibration. It has ability to detect a wide range of material densities.